Browse All Products


View Cart

UPS Tracking


Milwaukee 1/2" Drill

1/2" Magnum  Drill
This Heavy-Duty Magnum drill is built for Industrial/Construction applications. It features raw power with a Milwaukee built 5.5 amp motor, 0-1200 rpm trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites. Milwaukee products have a limited warranty.
  • Aluminum gear case and diaphragm, supplies greater support for shaft and bearings
  • Heavy-Duty 1/2" industrial chuck
  • Powerful MILWAUKEE built motor 5.5 AMPS!
  • Trigger speed control w/ Reversing Switch
  • High strength, impact resistant handle
  • Quick-Lock Cord
Model: MIL- 0234-6
$159.95  $149.95


 Capacity in Steel:

Volts, AC only


No load RPM:

Gear Train

Chuck Diameter & Thread:

1/2" - 20tpi
Shipping weight:

6 lbs
You might also be interested in other tube notching accessories...
TWITS "Thin Wall Independent Tube Support"  For Notching thin tube!
T-WiTS will improve the clamping capabilities in most all vises, saws, and tube notchers!


TN100 Tube Notcher  Don't let the low cost fool you. This is a quality notcher that will get the job done!  Capable of notching 3/4" to 2" tubing. Made in the USA.  Don't trust the cheap imitations!
Notch Master Tube Notcher A Quality,  USA made notcher.  Copes tubing from 3/4" up to 3" diameter. The Notch Master has the ability to do "offset" copes, which is a really nice feature when working with different sizes of tube.
The SYNC180 Tube Notcher is the heart of the SYNC NOTCHING SYSTEM. It's a quality built notcher proudly made in the USA . It's a versatile and is unlike most other holesaw-type notchers - it has the ability to cut at either side of the tube.
Model 32 Tubing Bender 
- Air-Hydraulic 
- 2-1/2"  OD Tube Capacity
- bends .250 wall thickness!

Starrett Hole Saws We recommend a quality hole saw when notching tube.


Tubing Centerline Finder  If you still struggle with marking centerline correctly try using a 'Centerline Finder'. You'll find that this handy tool will take the guesswork out of joining tube.



The Sync Bevel is a simple & practical tool to accurately match up the angle of two intersecting tubes to transfer the angle to a notcher. No more need to read degrees on a protractor.

Tube Notching 101
Notching made simple, a tutorial showing easy steps for making the perfect notch! 



View more Milwaukee Tools 

Home Page 

Product Listing 

Check Out: 


  Medford Tools and Supply, Inc. All rights reserved
Trademarks and/or copywriten pictures and texts of products we show on our pages are owned by the respective companies.